- HOME
- Art Column Driver
Sanwa Art Column Driver Series
Sanwa Art Column Driver Series are machine to rotate steel tube or reinforced concrete tube of diameter up to maximum Φ3000mm. Main purpose of this series is to make launching shaft and/or arriving shaft of pipe jacking job. Combination of Sanwa Pipe Jacking Equipment increases efficiently. Reinforced concrete tube which becomes manhole finally can be driven also. This series will be classified as lightduty rodam series.
Procedure
Casing Installtion
Digging
Rotation and Crowding
Base concrete Placing
This data. Please swipe lef or right.
| ART-200TE | ART-250TE | ART-300TE | |
|---|---|---|---|
| Drilling Dia. | Max. 2032mm | Max. 2590mm | Max. 3090mm |
| Stall Torque | Max. 40 ton-m | Max. 50 ton-m | Max. 100 ton-m |
| Rotation speed | Max. 1.6 rpm | Max. 1.3 rpm | Max. 1.1 rpm |
| Crowding Force | 28 ton w/Reaction Load | ||
| Extraction Force | 42 ton | 65 ton | 100 ton |
| Elevation Stroke | 400 mm | ||
| Weight (approx.) | 8.9 ton | 12.5 ton | 25 ton |
| Dimension | 3990 × 2500 × 1500 mm | 4590 × 3000 × 1500 mm | 5300 × 3700 × 1920 mm |
| Steel Casing Dia（Ø） | 1500, 1800, 2000 | 1500, 1800, 2000, 2500 | 2000, 2500, 3000 |
| RC Casing | Consult us | ||
| Power Pack | |||
| Engine | 50 PS / 2000 rpm | 126 PS / 2000 rpm | |
| Weight (approx.) | 1.9 ton | 3.0 ton | |
| Dimension | 2400 × 1250 × 1480 mm | 2900 × 1600 × 1850 mm | |
Please note that some products may be subject to small changes due to continuous studies into design and performance.